Free Offside Blinds Measurement in Auckland
A shade that's 8mm out on a 2.4-metre window leaves a gap you'll see from the couch every night. Here's how a free in-home measurement in Auckland avoids that, without you touching a tape measure.
Quick answer: EasyBlinds provides free in-home window measurement across Auckland when you order custom blinds, shades, shutters, or curtains. A local technician measures every window on-site before production starts, at no charge, and factory-direct pricing keeps the whole order 40%+ below what a local specialty store typically charges for the same job.
Why Accurate Measurement Matters
An Auckland homeowner we spoke with last month measured her lounge window herself, rounded up to the nearest centimetre, and ordered online. The shade arrived two weeks later sitting 8mm short on one side, just enough of a gap that light spilled in every evening.
Villas and bungalows across suburbs like Ponsonby, Mount Eden, and Grey Lynn were mostly built before window openings followed any standard sizing, and decades of settling haven't helped. Newer apartments in the CBD and Newmarket have their own version of the problem, where a couple of millimetres decides whether a shade clears a sliding-door track or catches on it. Harrisons Curtains, a longstanding Kiwi curtain and blinds retailer, notes that face-fit installations, mounted on or above the frame, tend to block light more effectively than recess-fit, since they don't rely on the window opening being perfectly square. Custom coverings get cut to whatever number you give the factory; there's no returns rack and no "close enough" size to swap into.
Free Measure & Quote in Auckland
Most local blinds and curtain retailers either bundle measurement into installation pricing or charge a standalone callout fee before you've placed an order. EasyBlinds skips that step. Book a free in-home measurement, and a local technician measures every window individually, checks for anything that might interfere with mounting, and notes light direction and privacy needs room by room, all before you commit to anything.
What Happens During the Visit
You book a time and someone comes to you. The visit generally runs 20 to 40 minutes depending on how many windows are involved, with no pressure to decide on the spot. The measurements go into your quote afterward, so you can take your time comparing options.
Auckland Service Areas
Free measurement and local installation currently cover the greater Auckland area, including the CBD, North Shore, Mount Eden, Ponsonby, Newmarket, and surrounding suburbs.
A recent EasyBlinds installation in Auckland, measured on-site before production.
Pricing and Turnaround Time
EasyBlinds manufactures the product itself instead of reselling through a showroom, which is where the 40%+ savings against local specialty stores comes from. There's no dealer markup between the factory and your window. Blinds and shades generally land in 7 to 14 days from confirmed measurement to installed; curtains and drapery run closer to 15 to 20 days given the extra fabric work. The same measurement that's confirmed on-site is the one that gets built and the one that gets installed, so there's no handoff between different people using different tape measures.
DIY Measurement Guide
If you want to check numbers yourself before booking, or just get a rough quote first, here's the short version.
Use a metal tape measure rather than a fabric one, since fabric stretches slightly. For an inside mount, measure the width at the top, middle, and bottom of the recess and use the narrowest number; measure height at the left, centre, and right and use the longest. For an outside mount, measure the area you want covered and add extra on each side and above and below so the shade blocks light at the edges instead of framing the window with gaps. Russells Curtains, another established New Zealand blinds supplier, recommends roughly 7 to 8cm of extra coverage on each side for this kind of outside-mount allowance.
The measurement doesn't need to be exact. A professional measurement is done free when you order, so a rough number is enough to get started, and the most common self-measuring mistakes (a stretchy tape, measuring only once, missing a handle or vent that needs clearance) all get caught during the in-home visit anyway.
Homeowners and Rental Properties
Auckland has a real base of Airbnb and short-term rental operators, and a measurement mistake on a rental property is a slower, more expensive fix once guests are already booked in. Free measurement across multiple units in one visit, paired with factory-direct pricing on a bulk order, tends to make more sense for a host than ordering unit by unit from three different suppliers.
Frequently Asked Questions
Is the in-home measurement really free, or is it built into the price somewhere else?
It's free when you place an order through EasyBlinds. Factory-direct pricing is what makes that possible; there's no dealer markup to recoup, so the measurement visit doesn't need its own line item.
Can you help me measure my window if I'm not confident doing it myself?
Yes. That's exactly what the free in-home visit is for. A technician measures every window on-site rather than relying on numbers you send in.
Do you cover areas outside central Auckland?
Free in-home measurement and installation cover the greater Auckland area. If you're further out, get in touch and we'll confirm whether your address is covered or walk you through our self-measurement guide instead.
How does professional measurement differ from measuring it myself?
A technician checks depth, mounting hardware clearance, and squareness at multiple points, then accounts for the product type you've chosen, since blinds, shades, and shutters each need slightly different allowances.
Where should I take measurements if I want to get a quote before booking?
Measure at three points across the width and three down the height with a metal tape measure, and note whether you want an inside or outside mount. It doesn't need to be exact.
Book Your Free Measurement in Auckland
No callout fee, no obligation to order on the spot. A local technician measures every window and you get an accurate quote to take your time with.
